WIDE BELT &BARREL BRUSH GRINDING FINISHING MACHINE
MODEL: SG1030-JS+B
Application: Stainless steel plate surface grinding and finishing
Machine description:Abrasive belt grinding+ barrel brush finishing
ABRASIVE BELT STATION:
1.1Contact rollers and pinch rollers are covered with high quality, heat and oil resistant rubber.
1.2Three seconds emergency disk brake for main motor.
1.3 Front lock on grinding head, with fine adjustment.
1.4 SKF spherical bearings are used on the contact roller.
1.5 In order to correct the deflection of abrasive belt the tension roller oscillates.
1.6 Photo-electrical controlled abrasive belt tracking.
1.7 The oscillating cylinder and tension cylinder are of heavy duty construction and easy to maintain.
1.8 Fine adjustment of abrasive belt oscillation
1.9 Abrasive belt size: 1030mm×1900mm
1.10 Contact roller is driven by a tapered shaft pulley assembly.
BARREL BRUSH STATION:
Note:For the surface smooth and Hairline finishing.
1.13 3M nov-woven fabric Scotch Brite type barrel brush.
1.14 Gear worm lift of the Scotch Brite barrel brush, total adjustment 40mm.
2. Conveyor
2.1 High-quality conveyor belt standard.
2.2 Rubber covered pinch rollers before and behind aggregate, heat and oil resistant 60 mm diameter.
2.3 Automatic conveyor belt tracking control.
2.4 4-pillar synchronized jack system electrically operated with manual fine adjustment of work table.
2.5 Magnetic grid positioning sensor for work piece thickness calibration.
3. Electricity
3.1 Voltage: 230V, 3 phases, 60HZ
Voltage of controller: 24V
3.2 SchneiderR low-voltage equipment.
3.3 OmronR Photo-electrical abrasive belt tracking device.
3.4 Main Motor:/
3.5 Centralized buttons on stainless control panel, which is fixed on the left front side of the machine. Manual spiral lift. Returning the conveyor is by pressing one button possible.
3.6 MINICOKR digital thickness display(M15), in inch or metric. Made in Taiwan.
3.7 Conveyor speed is controlled by inverter.
3.8 Main electrical switch disconnect on front door of electrical cabinet.
3.9 Finger protection board is found on the front of the conveyor table to avoid injury.
3.10 Total of 5 protection switches, including 2 abrasive belt switches, and 2 emergency switches, to ensure the safety of operator.
3.11 Amp meter to monitor abrasive belt load and voltage meter.
4. Rack and construction
4.1 Under-rack is a high rigid steel sheet of 6mm, after folding, cutting, welding.
4.2 Upper -rack is a high quality cold rolled steel sheet of .
4.3 All rollers are made of carbon steel .
4.4 All rotating shafts are balanced.
5. Options
5.1 Dust collector
6. Technical parameters
Maximum working width |
1000mm |
Working thickness |
1-80mm |
Minimum working length |
270mm |
Dust extraction capacity |
5000m3/h |
Measurement of abrasive belt |
1030×1900mm |
Dimension |
1700×2200×2100mm |
Weight |
About 2000KGS |
|
|
7. Maintenance instructions
Rubberized rollers and rubber conveyor belts: 6 months,except for the man make destroy.
The rest: 1 year
8.Payment: TT 30% down payment, balance paid before shipment.
9.Delivery time: 60 days against down payment.
Option: Wet dust collector. 7.5KW
Extra barrel brush station for better hairline finishing
Model:SG1030-JS+2B