Jonsen Medium-thick metal parts de-slagging and edge rounding machine
Model:SB1000-2B
1.Applications:
The machine is capable of efficient de-slagging and edge rounding of medium-thick metal parts after oxy-fuel, plasma, or high power laser cutting processes.
The first work station is equipped with zig-zag patterned hammer type de-slagging disk station (D) for knocking out the heavy slags. 2nd work station is equipped with horizontally arranged crossbelt station for final edge rounding and surface smoothening.
The advantages are significant that the machine has low cost on consumables, creates minimum noise and metal dust during the production. The operation is very straightforward and user friendly. With such 2 work station configuration, the machine can achieve the optimal performance on de-slagging. It is a perfect solution to release manual labor from tedious de-slagging work!
2.Machine characteristic overview:
2.1.Dry operation
2.2Conveyor feed through type, high efficiency
2.3.Multi work station combination, one pass process to take care both de-slagging and edge rounding
2.4Special hammer type de-slagging disk with minimum consumable wear and optimal de-slagging performance
2.5Standard magnetic conveyor bed (partial or full width), capable of processing most of small sized ferrous parts
2.6Straight forward and user-friendly operation
2.7Auxiliary LED lighting inside machine
3.Ideal parts:
3.1Carbon steel, stainless steel, aluminum, and etc.
3.2Thickness range: 1mm and up
3.3Minimum part size (ferrous material): 30 x 30 mm
4.Optional configuration
4.1Dry filtration barrel type dust collector with spark arrestor
4.2Double side top and bottom de-slagging processing
5.Technical Data sheet
Maximum working width |
1000mm |
Working thickness range |
1-80mm |
Minimum working length (magnetic conductive material) |
40mm |
Conveyor feeding rate |
standard |
Steel alloy pillar top brush |
standard |
Cross belt |
standard |
Power of Steel alloy pillar top brush |
standard |
Power of cross belt |
standard |
Machine dimension |
2100x2150x1950mm |
Machine weight |
2500kgs |
6.Internal structure diagram:
6.1The first station: the steel ball end face brushing station (to the large hanging slag)
6.2The second station: abrasive belt station (removing inner hole and edge horn burr, blade blunt, slightly inverted R angle)
7.Equipment working conditions hold various performance and processing accuracy.
7.1The equipment should work stably for a long time under the following working conditions, and maintain continuous performance for 24 hours and maintain various performances and processing accuracy;
7.2 Power supply: three-phase AC 380V ± 10% 50HZ ± 1%
8Relative humidity: ≤ 85%
8. Supplier will supply high quality parts in time if any necessary. Any concern in machine operation, Supplier will provide consultation over the phone or fax. Any problem on the machine, we suggest proposal till the machine resumes to normal.
9.Price term is under FOB SHANGHAI TERM
Payment: 30% down payment, balance paid before shipment.
The goods will be delivered within 60days after receive of down payment.